Where do you use a spring washer on a car?

1. Where should I put my spring washer?
2. What goes first washer or spring washer?
3. Are spring washers necessary?
4. What is the difference between a flat washer and a spring washer?
5. Does the washer go on the bolt or nut side?
6. Do spring washers work?
7. Which side of the washer goes down?
8. Do washers go on both sides?
9. Should a flat washer be used with a spring washer?
10. What is a spring lock washer?
11. Do I need a flat washer with a lock washer?
12. Can spring washers be reused?
13. Where should washers be used?
14. What happens if you don't use washers?

Where should I put my spring washer?

Unlike flat washers, which are placed on both the bolt and nut side, spring washers only go on the nut side of the fastener to establish a bond. A spring washer offers axial flexibility that's intended to prevent loosening of the fastener with which it's paired.

What goes first washer or spring washer?

Method 1 of 3:

When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.

Are spring washers necessary?

Washers are not always necessary but it is common practice to use them anyway. How do spring washers work? Spring washers add tension to a fastener assembly and are used to absorb a shock or vibrations.

What is the difference between a flat washer and a spring washer?

Plain and spring washers are both used to distribute the load of a fastener. The difference lies in their shape. Plain washers are flat, whereas spring washers are curved. ... Spring washers are unique because they provide an axial load that counters vibrations and, thus, prevents fasteners from loosening.

Does the washer go on the bolt or nut side?

If there is only one washer used with a nut/bolt, it usually goes on the nut side. The nut in most circumstances is more movable, and is more commonly turned to tighten the assembly. The washer helps prevent damage to the surface of the object being fastened.

Do spring washers work?

Helical spring lock washers have been in use for well over 100 years. ... Junker originally showed in his work published in 1969 that these washers are ineffective in preventing loosening. Joints containing these washers have come loose resulting in structural failure leading to both material and human loss.

Which side of the washer goes down?

The general rule of thumb is that the flat side goes to the material, while the rounded side goes against the bolt or nut.

Do washers go on both sides?

Washers can go both sides, but the primary function of a washer would be to stop vibration from loosening the nut, so there's your first choice (with a slightly springy 'split' washer being a top choice) but also some nuts have locking technology… Washers are not always used with a nut and bolt.

Should a flat washer be used with a spring washer?

The order should be bolt head, flat washer, materials being clamped, flat washer, spring washer, nut. If you only have one flat washer per bolt, and if the material next to the bolt head is sufficiently hard to resist deformation, then the one flat washer should be on the nut side.

What is a spring lock washer?

Spring steel spring lock washers compress as the fastener is tightened and securely lock bolt or screw heads into place to prevent counterclockwise rotation from vibration. Spring steel construction offers resiliency.

Do I need a flat washer with a lock washer?

A lock washer is designed to press into the surface of the nut and whatever is being fastened. Flat washers spread out the load of the tension to prevent pull through or bending whats being fastened, but makes lock washers useless.

Can spring washers be reused?

Damaged or worn washers should not be reused, as this can limit the performance of the wedge-locking effect and expose your bolted joints to loosening.

Where should washers be used?

washer, machine component that is used in conjunction with a screw fastener such as a bolt and nut and that usually serves either to keep the screw from loosening or to distribute the load from the nut or bolt head over a larger area.

What happens if you don't use washers?

Most notably, washers protect the surface from damage during installation. They distribute the pressure and prevent the fastener from moving or corroding. Skipping on washers can dramatically reduce the lifespan of how your product is put together. Ultimately, that leads to disaster for the product itself.